What is Projiso Fixo Dur®
Projiso Fixo Dur® is a complex aqueous phase mixture of silicates and acrylic copolymers.
Finishes
A finish can be applied depending on the support.
What are the key features of Projiso Fixo Dur®
Projiso Fixo Dur® can be stored for a maximum of 12 months in its original, hermetically sealed drums. Projiso Fixo Dur® must be stored indoors in dry conditions between 5°C and 45°C. It must be protected against frost
Projiso Fixo Dur® is packaged in 25-kg drums
TECHNICAL CHARACTERISTICS
| Color | White |
| Specific weight | 1,1 ± 0,5 g/cm³ |
| pH | 12 |
| Dilution | Do not dilute |
| Coloring | colorless |
| Consumption | From 1 to 2 kg/m² |
| Application temperature | From 5 to 45°C |
| Drying time at 20°C and 60% RH | 8 hours (dry to the touch) 48 hours completely dry |
| Brookfield viscosity at 25°C | 4 to 6 cps |
| Number of layers | NA |
| Number of socket | NA |
| reaction to fire | NA |
| C.O.V | A+ |
The information given in this technical document is based on actual testing and is believed to be product specific. No guarantee of results is however implicit, the conditions of use remaining beyond our control.
Projiso Fixo Dur® areas of application
Projiso Fixo Dur® is a hardener for fibrous coatings.
It acts by impregnation. Its novel formula combined with its particularly low viscosity
allows it to penetrate the fibrous coating to a depth of up to 15 mm. It is applied by spraying.
Projiso Fixo Dur® implementation techniques
Depending on the desired results, apply PROJISO FIXO DUR® hardener by pneumatic spraying between 1 and 2 kg/m2 directly onto the fibres (wet or not).
What is Sidairless®
Sidairless® is an aqueous dispersion of vinyl copolymers with inert mineral fillers.
What are the key features of Sidairless®
Sidairless® can be stored for a maximum of 9 months in its original, hermetically sealed drums. Sidairless® must be stored indoors in dry conditions between 5°C and 30°C. It must be protected against frost
Sidairless® is packaged in 25-kg drums.
TECHNICAL CHARACTERISTICS
| Color | Bright white or tinted |
| Specific weight | 1,60 ± 0,1 g/cm³ |
| pH | 8,5 ± 0,5 |
| Dilution | Do not dilute |
| Coloration | On site or in production |
| Consumption | 0.7 to 2 kg/m² depending on the quality of the support |
| Application temperature | From 5 to 30°C |
| Drying time at 20°C and 60% RH | 12 hours/mm |
| Brookfield viscosity at 25°C | 78 000 to 82 000 cps |
| Number of layers | NA |
| Number of socket | NA |
| reaction to fire | A1 |
The information given in this technical document is based on actual testing and is believed to be product specific. No guarantee of results is however implicit, the conditions of use remaining beyond our control.
Sidairless® areas of application
Sidairless® is a fine, ready-to-use coating, specially designed for the surfacing and mechanical reinforcement of fibrous coatings
Sidairless® implementation techniques
Sidairless® is applied by spraying with coating pumps as from a minimum flow rate of 5.6 L/min, using nozzles 25 to 29.
The product is applied to a fibrous or slurry coating that has dried for at least 48 hours (at 20°C and 60% RH).
Do not apply at temperatures below 5°C, or at a humidity level above 65%, or on heated surfaces.
The application rate is approx. 100 m2/h.
The product can be churned in a mixing turbine designed for slurry materials. It is advisable to carry out a colour test. Other colours/shades can be developed during the production process; please ask us.